In compliance with UK Building Regulations in England and Wales, electrical pond equipment must be sold without a fitted molded plug.

We do apologize as we realize this does cause inconvenience but we must comply with the regulation. If you require further assistance please do not hesitate to contact us.

Please ensure the filter is wired safely into an approved external RCD switch with a rated residual operating current not exceeding 30mA.

  IMPORTANT  
  • This unit must be earthed. Never use a higher-rated fuse than that specified in your product manual.
  • Do NOT connect to any voltage other than that stated on the unit.
  • We strongly recommend that you consult a qualified electrician if you are in doubt about any aspects of the wiring.