In compliance with UK Building Regulations in England and Wales, electrical pond equipment must be sold without a fitted moulded plug. 

We do apologise as we realise this does cause inconvenience but we must comply with the regulation. If you require further assistance please do not hesitate to contact our customer services team

Please ensure the pump is wired safely into an approved external RCD switch with a rated residual operating current not exceeding 30mA.

See our guide on pond electrical safety

  IMPORTANT  
  • This pump must be earthed. Never use a higher rated fuse than that specified in your product manual.
  • Do NOT connect to any voltage other than that stated on the unit.
  • We strongly recommend that you consult a qualified electrician if you are in doubt about any aspects of the wiring.